Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This Dexter idler hub comes pre-greased and ready to install, which makes getting back on the road or water fast and clean. The bearings are already packed and sealed, so there’s no need to handle messy grease or worry about contaminating the races. Just slide it onto your #84 spindle, torque it down, and you’re done. It’s a simple, dependable setup that keeps maintenance easy.
This hub assembly comes complete with inner bearing (L68149), outer bearing (L44649), matching races (L68111 and L44610), grease seal (58846), grease cap, wheel bolts, and lug nuts. Having everything included means you don’t have to track down small parts or wonder if you’ve got the right fit. It’s an all-in-one solution for quick replacement or keeping a spare on hand.
Built from solid iron, this hub is made to handle steady loads day after day. Each hub supports up to 1,750 lbs for a combined 3,500-lb axle rating. It’s tough enough for demanding conditions yet smooth running once installed. That durability gives peace of mind whether you’re hauling gear locally or logging miles on the highway.
The 5 on 5" bolt pattern works with typical 13", 14", 14-1/2", and 15" wheels, giving flexibility across many trailer setups. The 1/2" diameter x 1-1/4" long studs provide solid wheel retention, and the included E-Z Lube and standard grease caps make it simple to maintain over time. It’s a dependable fit for anyone needing a strong, straightforward hub solution built for 3,500-lb axles.
1. Count the lug holes
Look at the wheel hub or the back of the wheel and count how many lug holes there are(also called bolt holes).
Common configurations include: 4-lug, 5-lug, 6-lug and 8 lug
2a. For even lug counts (4-lug, 6-lug, 8-lug)
Measure from the center of one lug hole directly across to the center of the hole opposite it.
Common configurations: 4 on 4", 6 on 5.5", 8 on 6.5"
2b. For odd lug counts (5-lug)
Measure from the center of one lug hole to the outer edge of the hole directly across (not center-to-center since there's no directly opposite hole).
Common configurations: 5 on 4.5" (most popular), 5 on 5", 5 on 4.75", 5 on 5.5"
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi, everybody. Andy here with etrailer.com. And today, we're gonna take a look at this Dexter pre-greased trailer idler hub. This hub assembly is going to fit your 3,500 pound trailer axles with number 84 spindles. And this comes pre-greased with Dexter grease with the bearings and the seal already assembled so it's going to be ready to install right out of the box with no need to pack bearings. And what that means for you is less mess and less time to install.
So, this is going to be a very convenient install for you. Now though, this is going to work with wheel sizes from 13 inches to 15 inches and the bolt pattern is five on five inches. And the wheel stud diameter is a half an inch and the length of the stud is an inch and a quarter long. Now, the weight capacity is 1,750 pounds. And as I mentioned, the bearings, races, and double lip grease seal are not only included but also installed in this hub.
And as you can see, this is our outer bearing and you can see that grease in there. And then turning this back around, we have our double lip grease seal with our inner bearing inside. And of course, the races are installed in there as well. And the bearing information I have there for you on your screen, the inner bearing is L68149 and the outer bearing is L44649. So, this also includes everything that you see here on the table before me.
You're going to get grease caps, the standard grease cap, and then the E-Z Lube grease cap, whichever's going to be best for your application. And then, of course, we have our washers, we have our slotted jam nut, we have our cotter pin. And then we have our hex jam nut as well and our nut retainer. Of course, our lug nuts. So, everything that you need to successfully install this.
And again, you're not gonna have to worry about the mess of packing your bearings. This hub is made here in the USA of a sturdy iron construction so very strong and durable. And an instruction sheet is also included to walk you through the installation process. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
Ratings & Reviews

Pat A.
3/15/2018
The hubs are still sound after a year of occasional use. The configuration has worked well for me and still pleased with the results of the products Im using.

Jack S.
9/16/2021
So far so good ! Ive towed my boat wtrailer from Savannah to Port Charlotte Florida and return and many local trips with no incident.
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.





Zane T.
10/11/2026
It has been a year and the hubs and bearings are still working perfectly, Although I havent put a ton of miles on them. No complaints!